Welcome, guest
(
Login
)
Recent Changes
| Page: | Revision: | Last Edited: | Edited by: |
|---|---|---|---|
|
NEEK-uCLinux-eek.zip |
Revision 4 (see history) |
(05/08/2008) |
mschnell |
|
TryOutuClinux You may try out the uClinux on your Altera Nios dev board before compiling anything. You can learn how to run a compiled program on your board. It is a ... |
Revision 50 (see history) |
(05/08/2008) |
maddogbattie |
|
ModuleProgramming If you will write driver, try out the hello world module example in the (must have) book "Linux Device Driver 3rd ed.".In your kernel dir, eg, ~/uClinux-dist,save ... |
Revision 11 (see history) |
(05/01/2008) |
hippo5329@yahoo.com.tw |
|
CGI and Boa CGI in C with BoaThis source is written for the DE2 board with hippos sof for the framebuffer.The uClinux version was one unstable . But should work also with ... |
Revision 3 (see history) |
(04/28/2008) |
mamba125 |
|
QuartusforLinux The latest Altera Design Software 7.2 is supported on the following Linux operating systems and versions: Red Hat Enterprise Linux 3 (32 bit & 64 bit) Red Hat Enterprise Linux ... |
Revision 25 (see history) |
(04/27/2008) |
hippo5329@yahoo.com.tw |
|
µClinux µClinuxThe original uClinux was a derivative of Linux 2.0 kernel intended for microcontrollers without Memory Management Units (MMUs). Later the patches of uClinux were merged back to the ... |
Revision 133 (see history) |
(04/27/2008) |
mamba125 |
|
CGI_in_C_with_BOA.zip |
Revision 4 (see history) |
(04/27/2008) |
mamba125 |
|
WikiHome Nios Community Wiki Welcome to the Nios Wiki. Please feel free to contribute. Register here to get a wiki login to edit, create new pages and post comments.This Wiki ... |
Revision 105 (see history) |
(04/25/2008) |
admin |
|
EmbeddedDesignGuides This is a dedicated area for places to post design guides for new and experienced Nios II users. Feel free to add your own design guides and to leave comments ... |
Revision 11 (see history) |
(04/25/2008) |
admin |
|
uCLinux on NEEK via SD-Card Application Loader This uCLinux distribution was created using the current (April 2008) uClinux-dist and BuildRoot system, informations and downloads from the NIOSWiki and the eek.sh script provided with the NEEK ... |
Revision 3 (see history) |
(04/25/2008) |
mschnell |
|
CompileHello To compile a simple program, just add -elf2flt to link flagCreate a file, hello.c #include <stdio.h>int main(void){ printf("hello world\\n");}nios2-linux-uclibc-gcc ... |
Revision 15 (see history) |
(04/24/2008) |
hippo5329@yahoo.com.tw |
|
openssl.patch |
NEW | (04/21/2008) |
vishnu350 |
|
openssl.mk |
NEW | (04/21/2008) |
vishnu350 |
|
linux-2.6.24-nios2nommu.patch |
NEW | (04/15/2008) |
hippo5329@yahoo.com.tw |
|
EtherNet To enable network driver support, in uClinux-dist kernel config, Device Drivers -->Network device support ─>[*] Network device support[*] Ethernet (10 or 100Mbit) [*] SMC 91C9x/91C1xxx support # only if you use ... |
Revision 79 (see history) |
(04/13/2008) |
hippo5329@yahoo.com.tw |
|
cycloneIII_embedded_evaluation_kit_standard_ocm.qar |
Revision 2 (see history) |
(04/13/2008) |
hippo5329@yahoo.com.tw |
|
UneekPresenter Placeholder |
NEW | (04/11/2008) |
admin |
|
LinuxConfig In kernel menuconfig, you should usually select either jtag uart or serial uart for console device (but not both).NOTE, you can use JTAG UART console during development. But if ... |
Revision 16 (see history) |
(04/10/2008) |
hippo5329@yahoo.com.tw |
|
Manual |
NEW | (04/09/2008) |
kvprathap |
|
web www.embeddedsolutions.com |
Revision 3 (see history) |
(04/09/2008) |
kvprathap |
|
Shell The sash shell is very limited, though it has small footprint. You can add other shells when you need more powerful scripting or redirection.But don't try bash, it ... |
Revision 4 (see history) |
(04/08/2008) |
hippo5329@yahoo.com.tw |
|
MmcSd SD/SDIO/MMC Host DriverPlease visit http://www.fps-tech.net/products.html for detailed information on the FPS-Tech SD/SDIO/MMC Host Driver.uClinux driver is available ... |
Revision 2 (see history) |
(04/07/2008) |
jai.dhar@gmail.com |
|
Comment110 Hi, This demo is very cool, but when i try to change the resolution, its difficult, there are two components encrypted .cpp, (neek_ddr_vga_16_dma,neek_ddr_lcd ... |
NEW | (04/07/2008) |
kpeswaran |
|
linux_time_limited.sof |
NEW | (04/07/2008) |
hippo5329@yahoo.com.tw |
|
linux_1c12_eval.ptf |
NEW | (04/07/2008) |
hippo5329@yahoo.com.tw |